Influence of Carbon Fibers on the Rutting Susceptibility of Sustainable HMA Mixtures with Untreated Recycled Concrete Aggregates

Main Article Content

Nadheer Albayati
Mohammed Qadir Ismael

Abstract

This paper focuses on achieving sustainability to reduce the detrimental effect on the environment and the economic aspects by including several ratios of coarse recycled concrete aggregates (RCA) (25, 50, 75, and 100%) in asphalt mixtures. The methodology included testing all raw materials, the wheel tracking test to assess mechanical performance, and the Marshall design approach to determine the appropriate asphalt content. The outcomes demonstrated no discernible difference between the volumetric characteristics of the asphalt mixtures containing RCA and the control mix. Marshall's stability rose by 14.2% when 50% of the mixture contained RCA compared to the control combination. All combinations containing RCA were performed inferiorly to the control mixture regarding rutting. 19.63% was the greatest increase in rut depth for combinations made entirely of recycled concrete aggregate. Several percentages of 0.2, 0.25, and 0.3% carbon fibers were added to the total weight of the asphalt mixture to enhance rutting performance. Marshall's stability and resistance to rutting have significantly increased, attributable to the carbon fibers; nonetheless, the volumetric properties of the asphalt mixture have only slightly altered. The combinations with 0.3% carbon fiber reinforcement and 50% RCA showed the largest gain in Marshall stability, up 34.6% above the control mixture. The same combination had the strongest resistance to rutting, which was —39.08% higher than the control mixture.

Article Details

How to Cite
Albayati, N., & Ismael, M. Q. (2024). Influence of Carbon Fibers on the Rutting Susceptibility of Sustainable HMA Mixtures with Untreated Recycled Concrete Aggregates. Journal of Studies in Science and Engineering, 4(1), 123–141. https://doi.org/10.53898/josse2024419
Section
Research Articles

References

Abbas, H. S., Ali, S. S., Hassoon, A., 2023. Using recycled bricks to improve the compressive strength of concrete and produce lightweight concrete. Heritage and Sustainable Development, 5(2), pp. 175–182. https://doi.org/10.37868/hsd.v5i2.238.

Nebrida, J., Gomba, F. E., 2023. Sustainable construction strategies for building construction projects in the Kingdom of Bahrain: a model. Sustainable Engineering and Innovation. 5(1), pp. 31-47. https://doi.org/10.37868/sei.v5i1.id193.

Al-Bayati, N. K., Ismael, M. Q., 2024. Rutting Prediction of Asphalt Mixtures Containing Treated and Untreated Recycled Concrete Aggregate. Journal of Engineering, 30(2), pp. 105–117. https://doi.org/10.31026/j.eng.2024.02.07.

Ismael, M. Q., Joni, H., Fattah, M., 2023. Neural network modeling of rutting performance for sustainable asphalt mix-tures modified by industrial waste alumina. Ain Shams Engineering Journal, 14(5), 101972. https://doi.org/10.1016/j.asej.2022.101972.

Zuluaga-Astudillo, D., Rondón-Quintana, H., Zafra-Mejía, C., 2021. Mechanical performance of gilsonite modified asphalt mixture containing recycled concrete aggregate. Applied Sciences, 11(10), 4409. https://doi.org/10.3390/app11104409.

Naser, M., tasim Abdel-Jaber, M., Al-shamayleh, R., Louzi, N., Ibrahim, R., 2022. Evaluating the effects of using re-claimed asphalt pavement and recycled concrete aggregate on the behavior of hot mix asphalts. Transportation Engi-neering, 10:100140. https://doi.org/10.1016/j.treng.2022.100140.

Nazal, H., Ismael, M. Q., 2019. Evaluation the moisture susceptibility of asphalt mixtures containing demolished con-crete waste materials. Civil Engineering Journal, 5(4), pp. 845-855. http://dx.doi.org/10.28991/cej-2019-03091293.

Ugla, S., Ismael, M. Q., 2023. Evaluating the Moisture Susceptibility of Asphalt Mixtures Containing RCA and Modi-fied by Waste Alumina. Civil Engineering Journal, 9, pp. 250-262. https://doi.org/10.28991/CEJ-SP2023-09-019.

Al-Saad, A. A., Ismael, M. Q., 2022. Rutting prediction of hot mix asphalt mixtures reinforced by ceramic fibers. jour-nal of Applied Engineering Science, 20(4), pp.1345-1354. https://doi.org/10.5937/jaes0-38956.

Covilla-Varela, E., Turbay, E., Polo-Mendoza, R., Martínez-Arguelles, G., Cantero-Durango, J., 2023. Recycled Con-crete Aggregates (RCA)-based asphalt mixtures: A performance-related evaluation with sustainability-criteria verifi-cation. Construction and Building Materials, 403, 133203. https://doi.org/10.1016/j.conbuildmat.2023.133203.

Li, M., Xie, J., Wu, S., Chen, J., 2023. Study on the influence mechanism of recycled concrete aggregate on strength of asphalt mixtures. Construction and Building Materials, 400, 132720. https://doi.org/10.1016/j.conbuildmat.2023.132720.

Ismail, S., Ramli, M., 2017. Engineering properties of treated recycled concrete aggregate (RCA) for structural appli-cations. Construction and Building Materials, 44, pp. 464–476. https://doi.org/10.1016/j.conbuildmat.2013.03.014.

Al-Bayati, H., Tighe, S., Achebe, J., 2018. Influence of recycled concrete aggregate on volumetric properties of hot mix asphalt. Resources, Conservation and Recycling, 30, pp. 200-214. https://doi.org/10.1016/j.resconrec.2017.11.027.

Taher, Z., Ismael, M. Q., 2022. Rutting prediction of hot mix asphalt mixtures modified by nano silica and subjected to aging process. Civil Engineering Journal, 9, 1-14. http://dx.doi.org/10.28991/CEJ-SP2023-09-01.

Du, Y., Chen, J., Han, Z., Liu, W., 2018. A review on solutions for improving rutting resistance of asphalt pavement and test methods. Construction and Building Materials, 168, 893-905. https://doi.org/10.1016/j.conbuildmat.2018.02.151.

Ismael, M. Q., Fattah, M., Jasim, A., 2021. Improving the Rutting Resistance of Asphalt Pavement Modified with the Carbon Nanotubes Additive. Ain Shams Engineering Journal, 21(4), pp. 3619-3627. https://doi.org/10.1016/j.asej.2021.02.038.

Ismael, M. Q., Fattah, M., Jasim, A., 2022. Permanent deformation characterization of stone matrix asphalt reinforced by different types of fibers. Journal of Engineering, 28(2), pp. 99-116. https://doi.org/10.31026/j.eng.2022.02.07.

Abd, A. H., Qassim, Z. I., 2017. Contributory Factors Related to Permanent Deformation of Hot Asphalt Mixtures. Journal of Engineering, 23(3), pp. 20-34.

Raof, H., Ismael, M. Q., 2019 Effect of polyphosphoric acid on rutting resistance of asphalt concrete mixture. Civil Engineering Journal, 5(9), pp. 1929-1940. https://doi.org/10.28991/cej-2019-03091383.

Taher, Z., Ismael, M. Q., 2023. Moisture Susceptibility of Hot Mix Asphalt Mixtures Modified by Nano Silica and Subjected to Aging Process. Journal of Engineering, 29(4), pp. 128-143. https://doi.org/10.31026/j.eng.2023.04.09.

Al-Bayati, N. K., Ismael, M. Q., 2023. Effect of differently treated recycled concrete aggregates on Marshall proper-ties and cost-benefit of asphalt mixtures. Sustainable Engineering and Innovation, 5(2), pp. 127-140. https://doi.org/10.37868/sei.v5i2.id201.

Mills-Beale, J., 2010. The mechanical properties of asphalt mixtures with recycled concrete aggregates. Construction and Building Materials, 24(3), pp. 230-235. https://doi.org/10.1016/j.conbuildmat.2009.08.046.

Nwakaire, C., Yap, S., Yuen, C., 2020. Laboratory study on recycled concrete aggregate-based asphalt mixtures for sustainable flexible pavement surfacing. Journal of Cleaner Production, 262. https://doi.org/10.1016/j.jclepro.2020.121462.

Gul WA, Guler M (2014) Rutting susceptibility of asphalt concrete with recycled concrete aggregate using revised marshall procedure, Construction and Building Materials, 55: 341-349. https://doi.org/10.1016/j.conbuildmat.2014.01.043.

Fatemi, S., Imaninasab, R., 2016. Performance evaluation of recycled asphalt mixtures by construction and demoli-tion waste materials. Construction and Building Materials, 120, pp. 450-456. http://doi:10.1016/j.conbuildmat.2016.05.117.

Radević, A., Đureković, A., Zakić, D., Mladenović, G., 2017. Effects of recycled concrete aggregate on stiffness and rutting resistance of asphalt concrete. Construction and Building Materials, 136, pp. 386-393. https://doi.org/10.1016/j.conbuildmat.2017.01.043.

Bhusal, S., Li, X., Wen, H., 2013. Evaluating recycled concrete aggregate as hot mix asphalt aggregate. Advances in Civil Engineering Materials, 2(1), 20120053. https://doi.org/10.1520/acem20120053.

Shaopeng, W., Jinjun, Z., Jiqing, Z., Dongming, W., 2013. Influence of demolition waste used as recycled aggregate on performance of asphalt mixture. Road Materials and Pavement Design, 14(3), pp. 679–688. https://doi.org/10.1080/14680629.2013.779304.

Motter, J. S., Miranda, F. R., Bernucci, L. B., 2015. Performance of hot mix asphalt concrete produced with coarse recycled concrete aggregate. Journal of Materials in Civil Engineering, 27(11). https://doi.org/10.1061/(ASCE)MT.1943-5533.0001284.

Azarhoosh, A., Koohmishi, M., Hamedi, G. H., 2021. Rutting resistance of hot mix asphalt containing coarse recycled concrete aggregates coated with waste plastic bottles. Advances in Civil Engineering, 2021, pp. 1-11. https://doi.org/10.1155/2021/9558241.

SCRB. (2003). Hot-Mix Asphalt Concrete Pavement, Revised Edition, State Corporation of Roads and Bridges, Mi-nistry of Housing and Construction, Republic of Iraq.

AASHTO-T49. (2013). Standard Method of Test for Penetration of Bituminous Materials, American Association of State Highway and Transportation Officials, USA.

AASHTO T-51. (2013). Standard Method of Test for Ductility of Asphalt Materials, American Association of State Highway and Transportation Officials, USA.

AASHTO T-48. (2010). Standard Method of Test for Flash and Fire Points by Cleveland Open Cup, American Asso-ciation of State Highway and Transportation Officials, USA.

AASHTO T-179. (2009). Standard Method of Test for Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test), American Association of State Highway and Transportation Officials, USA.

ASTM C128. (2015). Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggrega-te, American Society for Testing and Materials, USA.

ASTM C142. (2010). Standard Test Method for Clay Lumps and Friable Particles in Aggregates, American Society for Testing and Materials, USA.

ASTM C127. (2015). Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggre-gate, American Society for Testing and Materials, USA.

ASTM C131. (2014). Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abra-sion and Impact in the Los Angeles Machine, American Society for Testing and Materials, USA.

ASTM D5821. (2017). Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggre-gate, American Society for Testing and Materials, USA.

ASTM C136. (2014). Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, American Society for Testing and Materials, USA.

ASTM C188. (2014). Standard Test Method for Density of Hydraulic Cement, American Society for Testing and Materials, USA.

Albayati, N., Ismael, M. Q., 2023. Effect of carbon fibers (length, dosage) on the Marshall and volumetric properties of HMA mixtures. Aibi revista de investigación administración e ingeniería, 11(3), pp. 71–80. https://doi.org/10.15649/2346030X.3243.

Albayati, N., Ismael, M. Q., 2024. Rutting performance of asphalt mixtures containing treated RCA and reinforced by carbon fibers. Aibi revista de investigación administración e ingeniería, 12(1), pp. 18–28. https://doi.org/10.15649/2346030X.3436.

ASTM D6926. (2016). Standard Test Method for Preparation of Asphalt Mixture Specimens Using Marshall Appara-tus, American Society for Testing and Materials, USA.

DIN EN 12697-22. (2020). Bituminous mixtures - Test methods - Part 22: Wheel tracking, European Standards.

El-Tahan, D., Gabr, A., El-Badawy, S., Shetawy, M., 2018. Evaluation of recycled concrete aggregate in asphalt mixes. Innovative Infrastructure Solutions, 3, pp. 1-13. https://doi.org/10.1007/s41062-018-0126-7.

Acosta Alvarez, D., Alonso Aenlle, A., Tenza-abril, A. J., Ivorra, S., 2019. Influence of partial coarse fraction substi-tution of natural aggregate by recycled concrete aggregate in hot asphalt mixtures. Sustainability, 12(1). https://doi:10.3390/su12010250.

Pasandín, A. R., Pérez, I., 2020. Performance of hot-mix asphalt involving recycled concrete aggregates. International Journal of Pavement Engineering, 21(9), pp. 1044-1056. https://doi.org/10.1080/10298436.2018.1518525.

Radević, A., sailović, I., Wistuba, M. P., Zakić, D., Orešković, M., Mladenović, G., 2020. The impact of recycled con-crete aggregate on the stiffness, fatigue, and low-temperature performance of asphalt mixtures for road construction. Sustainability, 12(10), 3949. https://doi.org/10.3390/su12103949.

Giri, J. P., Panda, M., Priyadarshini, M., 2023. Performance of bituminous paving mixtures containing recycled con-crete aggregate, fly ash and rice husk ash: A probabilistic approach. Ecocycles, 9(3), pp. 10-22. https://doi.org/10.19040/ecocycles.v9i3.335.

Razzaq, A. K., 2016. Possibility of utilizing recycled concrete aggregates in HMA mixture. Kufa Journal of Engi-neering, 7(3), pp. 96-109.

Kareem, A. I., Nikraz, H., Asadi, H., 2019. Performance of hot-mix asphalt produced with double coated recycled concrete aggregates. Construction and Building Materials, 205, pp. 425–433. https://doi.org/10.1016/j.conbuildmat.2019.02.023.

Kareem, A. I., Nikraz, H., Asadi, H., 2020. Characterization of Asphalt Mixtures Containing Double-Coated Recycled Concrete Aggregates. Journal of Materials in Civil Engineering, 32(2), 04019359. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003028.

Abass, B. J., Albayati, A. H., 2020. Influence of recycled concrete aggregate treatment methods on performance of sustainable warm mix asphalt. Cogent Engineering, 7(1), 1718822. https://doi.org/10.1080/23311916.2020.1718822.

Mikhailenko, P., Rafiq Kakar, M., Piao, Z., Bueno-Poulikakos, M., 2020. Incorporation of recycled concrete aggregate (RCA) fractions in semi-dense asphalt (SDA) pavements: Volumetrics, durability and mechanical properties. Cons-truction and Building Materials, 264, 120166. https://doi.org/10.1016/j.conbuildmat.2020.120166

Hussein, F. K., Ismael, M. Q., Huseien, G. F., 2023. Rock Wool Fiber-Reinforced and Recycled Concrete Aggregate-Imbued Hot Asphalt Mixtures: Design and Moisture Susceptibility Evaluation. Journal of Composites Science, 7(10), 428. https://doi.org/10.3390/jcs7100428.

Bhusal, S., Li, X., Wen, H., 2011. Evaluation of effects of recycled concrete aggregate on volumetrics of hot-mix asphalt. Transportation research record, 2205(1), pp. 36-39. https://doi.org/10.3141/2205-05.

Daquan, S., Yang, T., Guoqiang, SQ. P, Fan, Y., Xingyi, Z., 2018. Performance evaluation of asphalt mixtures contai-ning recycled concrete aggregates. International Journal of Pavement Engineering, 19(5), pp. 422-428. https://doi.org/10.1080/10298436.2017.1402594.

Tahmoorian, F., Samali, B., Yeaman, J., Mirzababaei, M., 2022. Evaluation of volumetric performance of asphalt mixtures containing recycled construction aggregate (RCA). International Journal of Pavement Engineering, 23(7), pp. 2191-2205. https://doi.org/10.1080/10298436.2020.1849686.

Cantero-Durango, J., Polo-Mendoza, R., Martinez-Arguelles, G., Fuentes, L., 2023. Properties of Hot Mix Asphalt (HMA) with Several Contents of Recycled Concrete Aggregate (RCA). Infrastructures, 8(7), 109. https://doi.org/10.3390/infrastructures8070109.