Energy-Performance Concrete Roof Slabs in Hot Climates Using Air Ventilation and False Ceiling with Baffles Shape: A Numerical and Modeling Study

Main Article Content

Hersh F. Mahmood
Hiwa Abdlla Maarof
Masood Abu-Bakr
Amira Soud

Abstract

The thermal performance of a concrete roof between the main slab (concrete slab) and secondary slab (gypsum board) has been investigated in this work with and without a ventilator. The hourly averaged climatic data (combined optical and thermal condition) of the external roof surface was used as the resource for the boundary conditions of Erbil city (Kurdistan Region, Iraq). The results of measuring the effects of using a ventilator between the concrete slabs and gypsum boards indicated that the moving air in the layer between slabs by using the ventilation process has more effect in cooling roofs and the room temperature had less than that of slabs that do not use ventilation, and so using baffle shape gypsum board as the secondary slabs for air turbulence to increase air velocity, the number of mass flow rates have more efficient in the cooling process and fast the cooling process, the surface temperature was reduced by (4.5oC and 3.6 oC) with the mass flow rates of (3.5kg/s)  and (2kg/s) respectively,  this is due to moving air makes roof slab cool and loss the heat that transfers through the slabs, so using this technique for an exciting roof is a good choice

Article Details

How to Cite
Mahmood, H. F. ., Maarof, H. A., Abu-Bakr, M., & Soud, A. (2022). Energy-Performance Concrete Roof Slabs in Hot Climates Using Air Ventilation and False Ceiling with Baffles Shape: A Numerical and Modeling Study. Journal of Studies in Science and Engineering, 2(4), 25–36. https://doi.org/10.53898/josse2022243
Section
Research Articles

References

B. Németh, A. Ujhidy, J. Tóth, J. Gyenis, and T. Feczkó, "Testing of microencapsulated phase-change heat storage in experimental model houses under winter weather conditions," Building Environment, vol. 204, p. 108119, 2021.

UNDP, "Buildings and climate change," ed: Technical report, indiaenvironmentportal. org, http://admin.indiaenvironmentportal.org.in/files/SBCI-BCCSummary.pdf 2009.

U. Eicker, Low energy cooling for sustainable buildings. John Wiley & Sons, 2009.

A. Ganguly, D. Chowdhury, and S. Neogi, "Performance of building roofs on energy efficiency–A Review," Energy Procedia, vol. 90, pp. 200-208, 2016.

Z. A. Al-Absi, M. I. M. Hafizal, and M. Ismail, "Experimental study on the thermal performance of PCM-based panels developed for exterior finishes of building walls," Journal of Building Engineering, vol. 52, p. 104379, 2022.

C. Pichardo, M. Romero-López, A. Ruiz-Durán, and T. García-Berbén, "Executive functions and problematic internet use among university students: The mediator role of self-esteem," Sustainability, vol. 13, no. 19, p. 11003, 2021.

H. A. Maarof, "Influence of Micro-Controller-Based Single Axis Solar Tracker System on Solar Panel’s Performance: Case Study," NTU Journal of Renewable Energy, vol. 3, no. 1, pp. 33-43, 2022.

X. Hong, M. K. Leung, and W. He, "Effective use of venetian blind in Trombe wall for solar space conditioning control," Applied Energy, vol. 250, pp. 452-460, 2019.

M. Salihi et al., "Evaluation of global energy performance of building walls integrating PCM: Numerical study in semi-arid climate in Morocco," Case Studies in Construction Materials, vol. 16, p. e00979, 2022.

Z. A. Al-Absi, M. I. M. Hafizal, M. Ismail, H. Awang, and A. Al-Shwaiter, "Properties of PCM-based composites developed for the exterior finishes of building walls," Case Studies in Construction Materials, vol. 16, p. e00960, 2022.

I. Asadi, M. H. Baghban, M. Hashemi, N. Izadyar, and B. Sajadi, "Phase change materials incorporated into geopolymer concrete for enhancing energy efficiency and sustainability of buildings: a review," Case Studies in Construction Materials, p. e01162, 2022.

G. Srikanth, A. Fernando, K. Selvaranjan, J. Gamage, and L. Ekanayake, "Development of a plastering mortar using waste bagasse and rice husk ashes with sound mechanical and thermal properties," Case Studies in Construction Materials, vol. 16, p. e00956, 2022.

M. Rawat and R. Singh, "A study on the comparative review of cool roof thermal performance in various regions," Energy Built Environment, 2021.

P. La Roche, D. J. Yeom, and A. Ponce, "Passive cooling with a hybrid green roof for extreme climates," Energy Buildings, vol. 224, p. 110243, 2020.

I. Hernández-Pérez, G. Álvarez, H. Gilbert, J. Xamán, Y. Chávez, and B. Shah, "Thermal performance of a concrete cool roof under different climatic conditions of Mexico," Energy Procedia, vol. 57, pp. 1753-1762, 2014.

R. T. A. Prado and F. L. Ferreira, "Measurement of albedo and analysis of its influence the surface temperature of building roof materials," Energy Buildings, vol. 37, no. 4, pp. 295-300, 2005.

D. Meddage, A. Chadee, M. Jayasinghe, and U. Rathnayake, "Exploring the applicability of expanded polystyrene (EPS) based concrete panels as roof slab insulation in the tropics," Case Studies in Construction Materials, vol. 17, p. e01361, 2022.

Q. Al-Yasiri and M. Szabo, "Case study on the optimal thickness of phase change material incorporated composite roof under hot climate conditions," Case Studies in Construction Materials, vol. 14, p. e00522, 2021.

A. Synnefa, M. Santamouris, and H. Akbari, "Estimating the effect of using cool coatings on energy loads and thermal comfort in residential buildings in various climatic conditions," Energy Buildings, vol. 39, no. 11, pp. 1167-1174, 2007.

H. H. Saber, A. E. Hajiah, S. A. Alshehri, and H. J. Hussain, "Investigating the effect of dust accumulation on the solar reflectivity of coating materials for cool roof applications," Energies, vol. 14, no. 2, p. 445, 2021.

K. K. Rashid, I. I. Hamakhan, and C. C. Mohammed, "Tilt Angle Optimization and Investigation of the Behavior of a Flat Plate Solar Collector Using MATLAB for Kurdistan Climate Conditions-Iraq," International Journal of Heat and Technology, vol. 40, no. 2, pp. 583-591, 2022.

H. A. Maarof and M. Shamsi, "Combining Thermal and Optical Modeling to Optimize the Performance of a Flat Plate Absorber at Various Locations in a Solar Air Collector," Journal of Studies in Science Engineering, vol. 2, no. 3, pp. 31-51, 2022.

H. Esen, F. Ozgen, M. Esen, and A. Sengur, "Artificial neural network and wavelet neural network approaches for modelling of a solar air heater," Expert systems with applications, vol. 36, no. 8, pp. 11240-11248, 2009.