Enhancing Concrete Strength with Recycled Disposable Face Mask Fibers: A Novel Approach to Sustainable Construction
Article Sidebar
Main Article Content
Abstract
The COVID-19 pandemic has exacerbated environmental challenges due to the widespread use of disposable face masks (DFMs), leading to significant microplastic pollution as millions of masks are discarded daily. This study introduces a novel recycling method that converts DFMs into fibers, subsequently added to concrete to enhance its structural properties. The process involves preliminary five-day sunlight disinfection of DFMs to ensure they are free from COVID-19. We examined the effects of these recycled face mask fibers (RFMFs) on the strength of concrete through tests on 270 samples, incorporating varying volume contents (0%, 0.15%, 0.30%, and 0.45%) and lengths (20 mm, 30 mm, and 40 mm) of RFMFs, each 5 mm in width. The specimens underwent curing for different durations (3, 7, and 28 days). The results indicated significant improvements in concrete strength with RFMF additions, particularly after three days of curing. An optimal increase of 17.47% in compressive strength was observed at a 0.15% volume content and 20 mm length of RFMF. Furthermore, an increase of 18.52% in splitting tensile strength was noted at a 0.15% volume content and 40 mm length of RFMF, while a 36.62% enhancement in flexural strength was achieved with a 0.45% volume content and 30 mm length. This research highlights an innovative approach to strengthen concrete early on, providing a practical solution to mitigate environmental impact and effectively managing waste from disposable face masks.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Journal of Studies in Science and Engineering is licensed under a Creative Commons Attribution License 4.0 (CC BY-4.0).
References
WHO, "Advice on the use of masks in the community, during home care and in health care settings in the context of the novel coronavirus (2019-nCoV) outbreak: interim guidance, 29 January 2020," World Health Organization, Geneva, 2020 2020, issue CC BY-NC-SA 3.0 IGO. [Online]. Available: https://apps.who.int/iris/handle/10665/330987
R. Suman, M. Javaid, A. Haleem, R. Vaishya, S. Bahl, and D. Nandan, "Sustainability of coronavirus on different surfaces," Journal of Clinical Experimental Hepatology, vol. 10, no. 4, pp. 386-390, 2020, doi: https://doi.org/10.1016/j.jceh.2020.04.020.
N. Singh, Y. Tang, and O. A. Ogunseitan, "Environmentally sustainable management of used personal protective equipment," Environmental Science & Technology, vol. 54, no. 14, pp. 8500-8502, 2020, doi: http://dx.doi.org/10.1021/acs.est.0c03022.
M. Boroujeni, M. Saberian, J. J. E. S. Li, and P. Research, "Environmental impacts of COVID-19 on Victoria, Australia, witnessed two waves of Coronavirus," vol. 28, pp. 14182-14191, 2021, doi: http://dx.doi.org/10.1007/s11356-021-12556-y.
C. Nzediegwu and S. X. Chang, "Improper solid waste management increases potential for COVID-19 spread in developing countries," Resources, conservation, recycling, vol. 161, p. 104947, 2020, doi: https://doi.org/10.1016/j.resconrec.2020.104947.
S. Sangkham, "Face mask and medical waste disposal during the novel COVID-19 pandemic in Asia," Case Studies in Chemical Environmental Engineering, vol. 2, p. 100052, 2020, doi: https://doi.org/10.1016/j.cscee.2020.100052.
A. Torres-Agullo, A. Karanasiou, T. Moreno, and S. Lacorte, "Overview on the occurrence of microplastics in air and implications from the use of face masks during the COVID-19 pandemic," Science of the Total Environment, vol. 800, p. 149555, 2021, doi: https://doi.org/10.1016/j.scitotenv.2021.149555.
S. S. Siwal et al., "Key ingredients and recycling strategy of personal protective equipment (PPE): Towards sustainable solution for the COVID-19 like pandemics," Journal of Environmental Chemical Engineering, vol. 9, no. 5, p. 106284, 2021, doi: https://doi.org/10.1016/J.JECE.2021.106284.
W. Ahmed, C. J. C. Lim, and B. Materials, "Effective recycling of disposable medical face masks for sustainable green concrete via a new fiber hybridization technique," vol. 344, p. 128245, 2022, doi: https://doi.org/10.1016/j.conbuildmat.2022.128245.
D. Battegazzore, F. Cravero, and A. J. P. Frache, "Is it possible to mechanical recycle the materials of the disposable filtering masks?," vol. 12, no. 11, p. 2726, 2020, doi: https://doi.org/10.3390/polym12112726.
E.-S. Jang and C.-W. Kang, "Do face masks become worthless after only one use in the COVID-19 pandemic?," Infection chemotherapy, vol. 52, no. 4, p. 583, 2020, doi: http://dx.doi.org/10.3947/ic.2020.52.4.583.
M. Idrees, A. Akbar, A. M. Mohamed, D. Fathi, and F. Saeed, "Recycling of Waste Facial Masks as a Construction Material, a Step towards Sustainability," Materials, vol. 15, no. 5, p. 1810, 2022. [Online]. Available: https://www.mdpi.com/1996-1944/15/5/1810.
S. Avudaiappan et al., "Innovative Use of Single-Use Face Mask Fibers for the Production of a Sustainable Cement Mortar," vol. 7, no. 6, p. 214, 2023, doi: https://doi.org/10.3390/jcs7060214.
M. Saberian, J. Li, S. Kilmartin-Lynch, and M. Boroujeni, "Repurposing of COVID-19 single-use face masks for pavements base/subbase," Science of The Total Environment, vol. 769, p. 145527, 2021/05/15/ 2021, doi: https://doi.org/10.1016/j.scitotenv.2021.145527.
S. Kilmartin-Lynch, M. Saberian, J. Li, R. Roychand, and G. Zhang, "Preliminary evaluation of the feasibility of using polypropylene fibres from COVID-19 single-use face masks to improve the mechanical properties of concrete," Journal of Cleaner Production, vol. 296, p. 126460, 2021, doi: https://doi.org/10.1016/j.jclepro.2021.126460.
ACI 544.4R-18, "Guide to design with fiber-reinforced concrete," 2018: American Concrete Institute.
ASTM D792-20, "Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement," in ASTM Standard, A. committee Ed. US, West Conshohocken: ASTM International, 2020.
ASTM D570-22, "Standard Test Method for Water Absorption of Plastics," in ASTM Standard, A. Committee Ed. US: American Society for Testing Materials, 2022.
ASTM D638-22, "Standard Test Method for Tensile Properties of Plastics," in ASTM Standard, A. International Ed. US: American Society for Testing Materials, 2022.
ASTM C150/C150M-22, "Standard Specification for Portland Cement," in ASTM Standard, A. S. f. T. a. Materials Ed. West Conshohocken, PA, USA, 2022.
ASTM C136/C136M-19, "Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates," in ASTM International. West Conshohocken: American Society for Testing Materials, 2019.
ACI 211.1-19, "Standard Practice for Selection Proportion for Normal,Heavy weight, and Mass Concrete," in ACI: American Concrete Institute, 2019, pp. 120-121.
ASTM C1116/C1116M, "Standard Specification for Fiber-Reinforced Concrete," in ASTM. United States: American Society for Testing and Materials, 2016.
BS EN 12390-3, "Testing hardened concrete Compressive strength. Specification for testing machines," British Standards Institution, 2019.
ASTM C496, "Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens," ASTM, 2017.
BS EN 12390-5, "Standard Testing concrete Method for determination of flexural strength ": British Standards Institution, 2019.